Rather have a pro do it for you?
| Tools and Supplies to Troubleshoot a Salt Pool Chlorine Generator | ||||
|---|---|---|---|---|
| 1 | Multimeter | |||
| 2 | Screwdriver set | |||
| 3 | Wire stripper | |||
| 4 | Wire cutter | |||
| 5 | Pliers | |||
| 6 | Adjustable wrench | |||
| 7 | Teflon tape | |||
| 8 | PVC pipe cutter | |||
| 9 | PVC glue | |||
| 10 | Silicone lubricant spray. | |||
How to Troubleshoot a Salt Pool Chlorine Generator
Troubleshooting Tips: Salt Pool Chlorine Generator Maintenance Made Easy
A salt pool chlorine generator is an essential component of any saltwater pool. It helps to maintain the proper chlorine levels in the pool, ensuring that the water remains clean, clear and safe for swimming. However, like any other pool equipment, the chlorine generator may sometimes malfunction. In this article, we will provide you with a step-by-step guide on how to troubleshoot a salt pool chlorine generator.
Step 1: Check the Salt Level
The first step in troubleshooting a salt pool chlorine generator is to check the salt level in the pool water. Low salt levels can cause the generator to malfunction, so it is important to ensure that the salt level is within the recommended range. You can use a salt test kit to check the salt level in the pool water.
Step 2: Check the Cell
The cell is the most important part of the chlorine generator. It is responsible for converting salt into chlorine. If the cell is dirty or clogged, it may not be able to produce enough chlorine. To check the cell, turn off the generator and remove the cell from the plumbing. Inspect the cell for any signs of damage, such as cracks or corrosion. Clean the cell with a cell cleaning solution and a soft brush. Rinse the cell thoroughly with water before reinstalling it.
Step 3: Check the Flow Switch
The flow switch is a safety feature that ensures that the generator only operates when there is water flowing through the plumbing. If the flow switch is not working properly, the generator may not turn on. To check the flow switch, turn off the generator and remove the flow switch from the plumbing. Inspect the switch for any signs of damage, such as cracks or corrosion. Clean the switch with a soft brush and reinstall it.
Step 4: Check the Control Panel
The control panel is the brain of the chlorine generator. It controls the operation of the generator and displays any error codes or messages. If the control panel is not working properly, the generator may not operate correctly. Check the control panel for any error codes or messages. Refer to the owner's manual for troubleshooting instructions for the specific error code or message.
Step 5: Check the Power Supply
The power supply provides the electricity that the chlorine generator needs to operate. If the power supply is not working properly, the generator may not turn on. Check the power supply for any signs of damage, such as frayed wires or loose connections. If the power supply is damaged, it may need to be replaced.
In conclusion, troubleshooting a salt pool chlorine generator requires a systematic approach. By following the steps outlined in this article, you can identify and fix any issues with your chlorine generator, ensuring that your pool remains clean, clear and safe for swimming.
