How to Connect a Salt Pool Chlorine Generator to a Pump

Connecting a salt pool chlorine generator to a pump is a relatively simple process that can be completed in a few easy steps. Here is a step-by-step guide to help you connect your salt pool chlorine generator to a pump:

Step 1: Turn off the power supply

Before you begin the installation process, make sure that the power supply to the pump is turned off. This will ensure that you can work safely without any risk of electric shock.

Step 2: Locate the inlet and outlet ports

Locate the inlet and outlet ports on the salt pool chlorine generator and the pump. The inlet port is where the water enters the generator, and the outlet port is where the treated water exits.

Step 3: Connect the generator to the pump

Connect the generator to the pump by attaching the inlet port of the generator to the outlet port of the pump using a PVC pipe. Use a PVC primer and cement to secure the connection. Make sure that the connection is tight and leak-proof.

Step 4: Connect the generator to the pool

Connect the generator to the pool by attaching the outlet port of the generator to the pool's return line using a PVC pipe. Use a PVC primer and cement to secure the connection. Make sure that the connection is tight and leak-proof.

Step 5: Install the salt cell

Install the salt cell into the salt pool chlorine generator. Follow the manufacturer's instructions for installation, as the process may vary depending on the brand and model of the generator.

Step 6: Turn on the power supply

Once you have completed the installation process, turn on the power supply to the pump and the generator. Test the system to ensure that it is working correctly by checking the flow of water through the generator and the level of chlorine in the pool.

In conclusion, connecting a salt pool chlorine generator to a pump is a simple process that can be completed in a few easy steps. By following these steps, you can ensure that your pool is properly treated with chlorine and ready for use.